Not checkedNot checked for notices yet.
Microstructure and anti-oxidation properties of CoNiCrAlY-Al 2 O 3 composite coatings based on core-shell structured powder design
GU Zi-wang, GUO Wen-min, ZHANG Hong-lin and 1 more
Cailiao gongcheng · 2021
doi:10.11868/j.issn.1001-4381.2020.001065 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The core-shell structured CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> powders were well-designed and fabricated with the Al<sub>2</sub>O<sub>3</sub> as the shell. The ball milling preparation process of core-shell structured powders was optimized by orthogonal experiment design. The phase structure and microstructure evolution of the high velocity oxy-fuel sprayed(HVOF) CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> coatings caused by using of core-shell structured powders were discussed. The oxidation behavior of HVOF CoNiCrAlY coating and CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> composite coating at 800 ℃ was comparatively studied.The results show that the influence of the process parameters on the average coating rate of the core-shell structured powders in descending order are: ball milling rotation speed, mass ratio of ball to powder and ball milling time.The optimal ball milling parameters for preparing CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> core-shell structured powders are: ball milling rotation speed of 180 r/min, mass ratio of ball to powder of 10∶1, and ball milling for 6 h. The HVOF CoNiCrAlY coating is mainly composed of γ-Co-Ni-Cr phase.The oxidation behavior of CoNiCrAlY alloy during spraying process is significantly inhibited by the using of core-shell structured raw powders. Due to the existence of the high melting point Al<sub>2</sub>O<sub>3</sub> shell in the raw powders, the CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> composite coating contains a high content of β-NiAl phase. In addition, the coating has high porosity and high content of un-melted particles.Compared with CoNiCrAlY coating, CoNiCrAlY-Al<sub>2</sub>O<sub>3</sub> composite coating has excellent high temperature oxidation resistance. The high content of β-NiAl and Al<sub>2</sub>O<sub>3</sub> in the composite coating leads to the formation of a dense Al<sub>2</sub>O<sub>3</sub> rich protective layer on the surface of the coating during high temperature oxidation. The oxide film significantly inhibits the growth of non-protective oxides.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.