Not checkedNot checked for notices yet.
Preparation and Properties of Insulation Flexible Cork Composites
GUO An-ru, LI Jie, XIAO De-hai and 1 more
Cailiao gongcheng · 2017
doi:10.11868/j.issn.1001-4381.2017.000406 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The cork composite (RC16) is prepared by using one-component moisture curing polyurethane (U030) as cork adhesive, and the cork composite exhibits excellent mechanical properties and flexibility, and its density is 0.40g/cm<sup>3</sup>. The effect of adhesive content, moisture content in cork granules, and curing condition on the thermal insulation property, flexibility, and mechanical properties of the RC16 cork was investigated. The results show that:the synthetic adhesive U030 has good compatibility and adhesion with cork granules, which can wrap the cork granules completely and distribute evenly; the mechanical properties of the cork composite exhibit first increasing and then decreasing with increasing moisture content in cork granules, and the maximum value is reached at 7.0%; with the increase of U030 content, each performance of the RC16 cork show rising firstly, and then towards a stabilizing trend, but the thermal conductivity increases correspondingly, so when U030 content is 30%, the comprehensive performance of composite is the best; the optimum curing condition of the RC16 cork is defined:curing temperature is 110℃ and curing time is 1.5h. RC16 exhibits good heat resistance, which can bear 800℃ ablation within 20s.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.