Skip to content
naulon

Not checkedNot checked for notices yet.

Effect of Cr 3 C 2 Addition on Properties of ZrB 2 -SiC Ceramic

LI Qi, YU Biao, GUO Feng-wei and 2 more

Cailiao gongcheng · 2018

doi:10.11868/j.issn.1001-4381.2017.000402 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

ZrB<sub>2</sub>-SiC ceramics with different Cr<sub>3</sub>C<sub>2</sub> contents (0%,5%,10%,20%,volume fraction) were successfully prepared by spark plasma sintering(SPS) process at 1700℃. The effect of Cr<sub>3</sub>C<sub>2</sub> content on mechanical properties and the oxidation behavior of ZrB<sub>2</sub>-SiC ceramics at 1500℃ was investigated. The results show that the internal defects of ceramics reduce due to the reaction between Cr<sub>3</sub>C<sub>2</sub> and the substrate phases during SPS sintering. With the increase of Cr<sub>3</sub>C<sub>2</sub> content (from 0% to 20%),the hardness increases from 12.6GPa to 15.8GPa and the fracture toughness increases from 4.9MPa&#183;m<sup>1/2</sup> to 6.7MPa&#183;m<sup>1/2</sup>. By adding 10%Cr<sub>3</sub>C<sub>2</sub>, the bending strength at room temperature can be improved to 708MPa, and the mass gain of ceramic after being oxidized for 10h at 1500℃ in air is less than 10mg/cm<sup>2</sup>, the thickness of the oxidation layer reaches a minimum value of 160<i>μ</i>m, which indicates that the oxidation resistance significantly enhances.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.