Not checkedNot checked for notices yet.
Preparation of Transparent TiO 2 Nanoporous Coating with Highly Photocatalytic Activity by Anodizing Ti Film with Loose Structure
LIANG Yin, LI Peng, PEI Wang and 3 more
Cailiao gongcheng · 2016
doi:10.11868/j.issn.1001-4381.2016.07.017 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The Ti film with special structure was deposited onto glass substrate by magnetron sputtering, then via the process of electrochemical anodization and annealing, a transparent TiO<sub>2</sub> nanoporous coating (denoted as TNP) with high photocatalytic activity can be directly formed on glass substrate. The crystal structure of the TNP was detected by X-ray diffractometry (XRD) and the morphology of the coating was observed by scanning electron microscopy (SEM). The transmittance, wettability and adhesion of TNP were investigated by UV-Vis spectrophotometer, contact angle meter and scratch tester respectively. Finally, the photocatalytic activity of TNP was evaluated by degradation of methylene blue solution under UV illumination. The results show that the prepared TNP coating has a nanoporous structure and only anatase can be found after annealing, the transmittance of TNP coating can reach 80% or more in visible region, with a super hydrophilic surface (contact angle<6°) and the adhesion strength between TNP coating and glass substrate is 2.9N; the degradation rate for methylene blue (<i>C</i><sub>0</sub>=1×10<sup>-5</sup>mol/L) can reach 94% in 2 hours and the photocatalysis reaction rate constant is 1.47h<sup>-1</sup>.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.