Not checkedNot checked for notices yet.
High Temperature Dry Sliding Friction and Wear Performance of Laser Cladding WC/Ni Composite Coating
YANG Jiao-xi, ZHANG Jian-quan, CHANG Wan-qing and 3 more
Cailiao gongcheng · 2016
doi:10.11868/j.issn.1001-4381.2016.06.017 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Two different types of agglomerate and angular WC/Ni matrix composite coatings were deposited by laser cladding. The high temperature wear resistance of these composite coatings was tested with a ring-on-disc MMG-10 apparatus. The morphologies of the worn surfaces were observed using a scanning electron microscopy (SEM) equipped with an energy dispersive spectroscopy (EDS) for elemental composition. The results show that the high temperature wear resistance of the laser clad WC/Ni-based composite coatings is improved significantly with WC mass fraction increasing. The 60% agglomerate WC/Ni composite coating has optimal high temperature wear resistance. High temperature wear mechanism of 60% WC/Ni composite coating is from abrasive wear of low temperature into composite function of the oxidation wear and abrasive wear.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.