Skip to content
naulon

Not checkedNot checked for notices yet.

Effect of Ge-doping on the Melting Property, Phase Structures and Spreadability of CsF-AlF 3 Flux

HE Pei-long, CHENG Fang-jie, XIAO Bing and 1 more

Cailiao gongcheng · 2018

doi:10.11868/j.issn.1001-4381.2016.000911 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

CsF-AlF<sub>3</sub> based composite fluxes with different Ge contents which are in the form of GeO<sub>2</sub> were developed by the method of solution synthesis, and their melting characteristics, phase structures and microstructures were observed and analyzed subsequently. Meanwhile, 2024 aluminum alloy was brazed successfully at 480℃ under the active effect of CsF-AlF<sub>3</sub> flux with 4% (mass fraction, the same below) Ge doped. The results show that the liquidus temperature decreases from 477℃ to around 440℃and has the main phase composition of CsAlF<sub>4</sub> and Cs<sub>2</sub>GeF<sub>6</sub> when content of Ge exceeds 4%. And the new Cs<sub>2</sub>GeF<sub>6</sub> changes the morphology of CsF-AlF<sub>3</sub> flux to more regular polyhedron structure with fewer flocculent agglomerates. On the other hand, the flux with 4% Ge immensely promotes the spreading of Zn-15Al filler metal on the 2024 aluminum alloy at 480℃ and the shear strength of brazing lapping joints reaches 110MPa,with homogeneous structure of the joints,and with no obvious defects observed.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.