Not checkedNot checked for notices yet.
Cryogenic Treatment of Carbide-free Bainite Steel After Carburizing
SUN Shi-qing
Cailiao gongcheng · 2017
doi:10.11868/j.issn.1001-4381.2015.000646 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The cryogenic treatment (CT) process of carbide-free bainite steel after carburizing was optimized by the method combining thermal magnetic analysis, microhardness analysis and direct reading spectrometric analysis. The results show that cryogenic treatment temperature of the hardened layer should be lower than 134K by measuring thermal magnetic curve of the sample after carburizing at 1193K and air cooling (AC). After cryogenic treatment at 123K and tempering (T) at 463K, retained austenite content of the hardened layer is about 12.2% (mass fraction). The near surface layer of carburized steel is hardened dramatically through the cryogenic treatment, and the hardness of near surface layer reaches about 810HV<sub>1.0</sub> after low temperature tempering. The distribution of hardness gradient of carburized steel tends to be reasonable.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.