Not checkedNot checked for notices yet.
Out-plane Compressive Properties for Isosceles Trapezoid Honeycomb Core of FRP Sandwich Panel
ZHENG Ji-liang, PENG Ming-jun, SUN Yong
Cailiao gongcheng · 2017
doi:10.11868/j.issn.1001-4381.2014.001534 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The experiment and simulation investigations on out-plane compressive characteristics of FRP sandwich panel were conducted. The results show that two deformation stages are elastic deformation and fracture stages in out-plane compressive deformation. The yielding mode deformation as <i>t</i><sub>1</sub>/<i>h</i> which is very big,while the buckling mode deformation as <i>t</i><sub>1</sub>/<i>h</i> which is very small. The part 2 in the honeycomb core is main bearing part for sandwich panel,and the part 2 is supported by the part 1 and part 3 in the honeycomb core,while the honeycomb core is supported by the panel. So,the cell wall thickness of part 2 has the most significant influence on the compressive strength,and the influence by the cell wall side length of honeycomb core is the secondary,while the influence by the cell wall thickness of part 1 and part 3 in honeycomb core and the thickness of panel is the weakest. When the honeycomb core height is fixed,the compressive strength of FRP sandwich panel gradually increases along with honeycomb core layers increase.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.