Skip to content
naulon

Not checkedNot checked for notices yet.

Assessment of liquid and gas impingement cooling fluids with numerical solution for better steel austempering

Azubuike Michael Nwankwo, Thomas Okechukwu Onah, Bertrand Nduka Nwankwojike

Journal of Engineering and Applied Science · 2022

doi:10.1186/s44147-022-00139-8 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract Impingement jet heat transfer was studied using liquid and gas fluids to determine better cooling fluid. The materials used were rectangular steel plates of 230 mm by 120 mm by 12 mm, single jet diameters of 10–40 mm with impingement gaps of 115–155 mm. A computational fluid dynamics software application ANSYS 2020R1 was employed for simulation, and lumped thermal mass analysis was used for experimental modeling. The experimental results showed an increase in heat transfer coefficient with increased pipe diameters and with a corresponding increase in impingement gaps and flow rate. This revealed 265.4–383.9 W/m2 K and 85.3–109 W/m2 K at diameter 10 mm and 336.5–365 W/m2 K and 109.0–137.5 W/m2 K at diameter 40 mm for both water and air, respectively. Numerical simulation revealed heat flux of 22518–38.94 W/m2 and 7570.2–4.25 W/m2 and 6742.8–27.1 W/m2 and 4155.6–6.1 W/m at diameters 10 mm and 40 mm, respectively. This confirmed that water remains a better cooling fluid with a 6.2% difference at the diameter of 10 mm and a 0.1% difference at the diameter of 40 mm. An acceptable error margin of 4 to 18% upon the comparison of empirical analysis with numerical simulation is obtained. The above suggests a better cooling rate for the microstructure of the steel using water against air.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.