Skip to content
naulon

Not checkedNot checked for notices yet.

Evaluation of tool performance and wear through vibration signature analysis in drilling of IS3048 steel

Annavarapu Venkata Sridhar, Balla Srinivasa Prasad, K. V. V. N. R. Chandra Mouli

Journal of Engineering and Applied Science · 2021

doi:10.1186/s44147-021-00036-6 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this paper, a connection between vibration amplitude and tool wear when drilling of IS3048 steel utilizing different dimensioned tools is dissected through tests. Discriminant features, which are sensitive to drill wear and breakage, were developed. These were discovered to be somewhat impervious toward sensor location and cutting conditions. In the process, the vibration amplitude features a checking highlight dependent on ascertaining both the tools and their performance over vibrations, which was discovered to be somewhat powerful for on-line identification of drill tool breakage in both frequency and time domains. These vibrational amplitude signal features are directly affected, related to the tool geometry, which give higher chances of tool selection criteria during the drilling process. The experiments were carried out using solid carbide tool with change in tool geometry under dry conditions where the vibration amplitude for both is evaluated. The results revealed that cutting tool vibrational amplitude and tool wear were relatively dependent showing the tool selection of suitable tool geometry.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.