Skip to content
naulon

Not checkedNot checked for notices yet.

Characterization of bulk piezoelectric element-based ultrasonic motors

Shunsuke Izuhara, Tomoaki Mashimo

ROBOMECH Journal · 2020

doi:10.1186/s40648-020-00179-w (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

We propose miniature ultrasonic motors using stators made of a single bulk piezoelectric element. The bulk piezoelectric stator has the potential to increase output by reducing the dissipation that occurs in the adhesion layer between the PZTs and a metallic component in the stator. In this paper, we build two kinds of bulk piezoelectric stators: a cubic bulk stator with a side length of 4.2 mm and a hole of 3 mm in diameter, and a cylindrical bulk stator with an outer diameter of 4.2 mm and the same hole diameter. We evaluate their electrical and mechanical characteristics, such as impedance and vibration velocity. The experiments clarify the advantages of the bulk piezoelectric stators, such as low dissipation. The cubic bulk stator, which shows higher performance than the cylindrical one, is compared with a similar-shaped stator using a bronze cube and thin piezoelectric plates. The performance measures of the cubic bulk ultrasonic motor are optimized by the preload between the stator and rotor.

Abstract licence: CC BY-NC-ND

References26

    26 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.