Not checkedNot checked for notices yet.
Optimization of deep reactive ion etching for microscale silicon hole arrays with high aspect ratio
Taeyeong Kim, Jungchul Lee
Micro and Nano Systems Letters · 2022
doi:10.1186/s40486-022-00155-6 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract During deep reactive ion etching (DRIE), microscale etch masks with small opening such as trenches or holes suffer from limited aspect ratio because diffusion of reactive ions and free radicals become progressively difficult as the number of DRIE cycle increases. For this reason, high aspect ratio structures of microscale trenches or holes are not readily available with standard DRIE recipes and microscale holes are more problematic than trenches due to omnidirectional confinement. In this letter, we propose an optimization for fabrication of high aspect ratio microscale hole arrays with an improved cross-sectional etch profile. Bias voltage and inductively coupled plasma power are considered as optimization parameters to promote the bottom etching of the high aspect ratio hole array. In addition, flow rates of octafluorocyclobutane (C $$_{4}$$ 4 F $$_{8}$$ 8 ) and sulfur hexafluoride (SF $$_{6}$$ 6 ) for passivation and depassivation steps, respectively, are considered as optimization parameters to reduce the etch undercut. As a result of optimization, the aspect ratio of 20 is achieved for 1.3 μm-diameter hole array and etch area reduction at the bottom relative to the top is improved to 21%.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.