Skip to content
naulon

Not checkedNot checked for notices yet.

Toluene sensing characteristics of tin oxide-based gas sensor deposited with various amounts of metalloporphyrin

Byeonghwa Cho, Jongbaeg Kim

Micro and Nano Systems Letters · 2022

doi:10.1186/s40486-022-00145-8 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract In this study, the sensing characteristics of tin oxide-based gas sensors deposit with different amounts of metalloporphyrin, which is a functionalization substance, are evaluated. The mass of metalloporphyrin deposited is 3, 10, 20, 30, and 40 mg for 5 different sensors prepared. The deposition of 3 mg of metalloporphyrin result in an island form of functionalization instead of a thin film; meanwhile, thin films with thicknesses of 25, 35, 74, and 92 nm are formed for the other four cases. As the deposition amount of metalloporphyrin increase, the performance of the sensor deteriorate. The samples are prepared by subdividing the amount of metalloporphyrin source to determine the optimized deposition amount. A sample is prepared with deposition amounts ranging between 1 to 10 mg. The sensors deposit with 3–5 mg metalloporphyrin has excellent response, response, and recovery time characteristics.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.