Not checkedNot checked for notices yet.
Polymer-based flexible and multi-directional tactile sensor with multiple NiCr piezoresistors
Soonjae Pyo, Jae-Ik Lee, Min-Ook Kim and 2 more
Micro and Nano Systems Letters · 2019
doi:10.1186/s40486-019-0085-6 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract A polymer-based tactile sensor with flexibility and multi-directional sensing capability is presented. The proposed sensor consists of a polydimethylsiloxane (PDMS) bump, a polyimide (PI) substrate, Cr/Au electrode lines for electrical connection, NiCr piezoresistors, and an SU-8 support structure. The sensing mechanism is based on piezoresistive effect, in which the resistance of NiCr changes under mechanical load. The PMDS bump positioned at the center of the sensor transfers an applied force to the PI film, and the piezoresistors are differently deformed depending on the magnitude and direction of the force. A diaphragm structure formed by the SU-8 support with a trench allows the piezoresistor to be effectively deformed. Simulation and experimental results confirm that magnitude and direction can be obtained from an arbitrarily applied force by comparing the change in resistance of each sensing element. Based on its compatibility with conventional microfabrication, the proposed sensor may be a promising candidate for a low-cost tactile sensing solution for human‒machine interfaces.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.