Skip to content
naulon

Not checkedNot checked for notices yet.

Design of Micro-strip Symmetrical Dual-band Filter Based on Wireless Sensor Network Nodes

Wenbo Cheng, Kai Deng, Wei Cheng

EURASIP Journal on Wireless Communications and Networking · 2019

doi:10.1186/s13638-019-1347-y (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Abstract The micro-strip antenna filter design of wireless sensor network nodes is usually used to improve the out-of-band suppression and frequency selectivity by increasing the order of the filters, but the filters are usually single band, not only the size is large, but also the in-band characteristics of the filters are not ideal. This paper proposes a method to design a micro-strip symmetric dual-band filter in wireless sensor network nodes. Firstly, the coupling matrix of single-passband filter is obtained by using the synthesis method of generalized Chebyshev filter function. Then, the coupling matrix of the dual-passband filter is generated according to the reflection zeros and the transmission zeros. Finally, the S parameters response curve is drawn by mapping the normalized frequency domain of the dual-passband to the actual frequency domain. According to the data analysis and experimental results, the method is feasible and effective to design a micro-strip symmetrical dual-band filter. It can not only provide a more guiding design method for the joint design of antenna and RF front-end circuit, but also realize the spread of single-passband filter to multi-frequency for a wireless sensor network node antenna.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.