Not checkedNot checked for notices yet.
Utilization of enzymatic hydrolysate from corn stover as a precursor to synthesize an eco-friendly adhesive for plywood II: investigation of appropriate manufacturing conditions, curing behavior, and adhesion mechanism
Zhongyuan Zhao, Di Wu, Caoxing Huang and 3 more
Journal of Wood Science · 2020
doi:10.1186/s10086-020-01933-9 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, further research on an enzymatic hydrolysate-ammonium dihydrogen phosphate (EHADP) adhesive was carried out. Appropriate hot pressing conditions were clarified by measuring the bond strength of three-ply plywood bonded with EHADP adhesive, and the results indicated that the appropriate fabricate conditions were 170 °C and 5 min. The value of wet shear strength fulfilled the requirements of China National Standard GB/T 9846–2015 when plywood was fabricated by the appropriate conditions. In the research of curing behavior, the insoluble mass proportion promoted significantly as heating temperature and time were ≥ 170 °C and 5 min. Furthermore, a pyrolysis gas chromatography/mass spectrometry analysis indicated that adding ammonium dihydrogen phosphate (ADP) catalyzed the conversion of monosaccharides in the EHADP adhesive. The adhesion mechanism of the EHADP adhesive was studied by Fourier transform-infrared spectroscopy analysis, and the chemical changes indicated that the adhesion mechanism was attributed to both mechanical and chemical bonding between the wood elements and the cured EHADP adhesive.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.