Not checkedNot checked for notices yet.
Influence of drying temperature on NO2 sorption ability of cedar timber
Miyuki Nakagawa, Kenji Umemura, Shuichi Kawai and 1 more
Journal of Wood Science · 2020
doi:10.1186/s10086-020-01877-0 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Abstract NO2 sorption ability of cedar (Cryptomeria japonica) timbers was evaluated using a new measuring system that was developed in our previous study. Four drying conditions were applied, namely natural drying and three kinds of kiln-drying at 45, 60, and 105 °C. Aeration experiments were conducted using discoid specimens which had a thickness in the longitudinal direction of 1.5 mm, and a diameter of 10 mm. The moisture content was conditioned to 0 or 9 ± 1.0% in each drying condition. As a result, the NO2 sorption ability declined as the drying temperature increased. Based on the analysis of extractives, it was shown that the extractives content had a high correlation with the contribution ratio of extractives in the NO2 sorption volume of the specimens that were dried below 60 °C. Therefore, it was elucidated that the specimen dried naturally has the greatest NO2 sorption ability. Furthermore, the result of the gas chromatography–mass spectrometry (GC/MS) indicated that abietadiene influenced the NO2 sorption ability. Also, the NO2 sorption volume was high especially at the initial stage, which is higher under the condition with moisture.
Abstract licence: CC BY
References17
17 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.