Not checkedNot checked for notices yet.
Novel surface optimization for trajectory reconstruction in industrial robot tasks
Miguel Angel Funes-Lora, Eduardo Vega-Alvarado, Raúl Rivera-Blas and 2 more
International Journal of Advanced Robotic Systems · 2021
doi:10.1177/17298814211064767 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This study presents a novel algorithm implementation that optimizes manually recorded toolpaths with the use of a 3D-workpiece model to reduce manual error induced. The novel algorithm has three steps: workpiece declaration, manual toolpath declaration, and toolpath optimization using steepest descent algorithm. Steepest descent finds the surface route wherein the manually recorded toolpaths traverse over a 3D-workpiece surface. The optimized toolpaths were simulated and tested with an industrial robot showing minimal error compared to the desired optimized toolpaths. The results obtained from the presented implementation on three different trajectories demonstrate that the proposed methodology can reduce the manual error induced using as a reference the CAD-workpiece surface.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.