Skip to content
naulon

Not checkedNot checked for notices yet.

All-position welding control system based on machine vision and nonlinear regression

Yu Tang, Zhongren Wang, Liying Jin and 2 more

Advances in Mechanical Engineering · 2021

doi:10.1177/16878140211052740 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Aiming at the problems of poor welding quality and low degree of automatic welding on the engineering site, a welding process parameter control method based on machine vision and nonlinear regression technology is proposed. Firstly, a vision unit and a peripheral sensor unit are designed to obtain the information of each influencing factor of the welding process parameters. Secondly, a clustering algorithm is used to improve the extraction accuracy of feature point coordinates of weld images. Thirdly, a nonlinear regression fitting method is proposed to determine the mathematical relationship between welding quality at different welding positions and corresponding process parameters. Experimental results show that the control system is easy to operate, and the flexible control of welding process parameters in the whole process is realized. The weld cumulative height and width deviations are less than 0.5 and 0.3 mm, respectively. The welding surface is stable and meets welding requirements. Therefore, this method is of great practical significance in engineering field welding.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.