Design and analysis of five-link-rod rigid constraint support scheme for engine–accessory system vibration control
Pandeng Zhang, Zhao Liu, Tao Jin and 3 more
Advances in Mechanical Engineering · 2019
doi:10.1177/1687814019881281 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Vibration generated by engine and its accessories deteriorates product performance. At present, lacking global model, mounting design of engine and accessories are separate, not conductive to solving the vibration of engine, belt, and accessories as a whole. In this article, three problems of the typical structure are analyzed, that is, the belt tension is unstable, static preloading makes engine mount design deviate, and the belt is prone to lateral vibration. Then, a rigid constraint rod is proposed to fix the center distance. The vibrational motion equation is established. By matrix analysis, the accessory mount along the rod is canceled. Then, engine and accessories can be analyzed as independent systems. Among them, the vibration isolation of the engine tends to be good, and for accessories and belts, the influences of the accessory mount stiffness on the force and torque transmission rate and belt vibration response were comprehensively evaluated, and that the infinite stiffness is presented. The innovative design of five-rod structure mainly composed of two connecting rods is obtained which does not transfer vibration perpendicular to rod and the vibration of engine, belt, and accessories are all well controlled. This experiment proves the five-link structure as a useful solution.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.