Skip to content
naulon
Not checkedNot checked for notices yet.

Recalculation of the basic static load of ball screws

Huaxi Zhou, Changguang Zhou, Yi Ou and 1 more

Advances in Mechanical Engineering · 2019

doi:10.1177/1687814019862698 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Based on the correction factor of accuracy applied in ISO standard 3408-4:2006, this article proposed a modified method to calculate the effective ball number and basic static load rating of ball screws. Meanwhile, the basic static load rating of ball screws was obtained through a new measurement method presented in this article. The experimental results, agreeing well with the theoretical values calculated by the modified method, showed that there is a large discrepancy between the basic static load rating calculated by the traditional method and the measured result, which proves that the new modified method is valid. This study provides a more accurate method to obtain the basic static load of ball screws, which is significant for predicting the performance and service life of ball screws.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.