Skip to content
naulon
Not checkedNot checked for notices yet.

Compliance analysis and lightweight design of a two-degree-of-freedom rotating head

Manxin Wang, Haitao Liu, Hutian Feng

Advances in Mechanical Engineering · 2019

doi:10.1177/1687814019835734 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This article presents an approach for the compliance analysis and lightweight design of a two-degree-of-freedom rotating head by considering both gravity and joint/link compliances, which provides a comprehensive understanding on the posture adjustment mechanism of five-degree-of-freedom hybrid manipulator. A kinetostatic analysis is carried out to consider both externally applied wrench imposed upon the end-effector and gravity of all movable components. Then, a deflection analysis integrating both joint and link compliances and formulation of component compliance matrices are completed by using a semi-analytical approach. Finally, the lightweight design of two-degree-of-freedom rotating head is realized by considering the deflection constraints. This approach enables to effectively evaluate the deflections of end-effector caused by both payload and gravity under given operation conditions. Moreover, the established method provides reliable guidelines for the design of two-degree-of-freedom rotating head with superior static rigidities and dynamic behaviors.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.