Skip to content
naulon
Not checkedNot checked for notices yet.

A new concept of vibration-control system in continuous miner machine

Arkadiusz Mężyk, Mariusz Pawlak, Jan Kania and 1 more

Advances in Mechanical Engineering · 2019

doi:10.1177/1687814018817364 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The article reviews the technical solution applied to these machines which are currently in use worldwide. Special attention is paid to the new concept of a cutter drum powertrain system, where the permanent magnet technology motors are proposed. Placing them inside the cutting drum results in improved dynamic performance of the mining process, as well as the possibility of modular configuration depending on the required operating condition. The authors analysed the dynamics of mining in continuous miner machines, where the adverse impact of vibrations during this process was noticed. The reason for this problem is the occurrence of resonance frequencies in the structure of the machine, which significantly shortens its life time. In previous publications, approaches based on avoiding resonance and adjusted shape modes to reduce displacement of cutter drum were presented. One of the ways to achieve this effect is to control cutter drum’s angular velocity. It allows thinking about a new concept of vibration-control system based on smooth speed change of the cutter drum or/and the angular speed of the boom.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.