Skip to content
naulon
Not checkedNot checked for notices yet.

Stress/strain and curvature analysis of laser-scribed polyethylene terephthalate films with multiple grooves using finite element method

Do Won Heo, Min Gi Kang, Ho Lee and 1 more

Advances in Mechanical Engineering · 2018

doi:10.1177/1687814018793236 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Laser scribing can be used to enhance the flexibility of polymer films for flexible device applications. To optimize the bending curvature by controlling the scribing parameters—the depth, number, and interval of the scribed grooves, finite element analysis was conducted on the bending tests of scribed polyethylene terephthalate films. Moreover, the influences of the parameters on the stress/strain near the grooves were investigated. The maximum stress/strain and curvature generally increased with an increase in depth, whereas these values decreased with an increase in number and intervals. However, to maintain the mechanical stability of the films, the parameters were limited. The optimization results revealed that the maximum value of the curvature was 2.6 mm −1 at depth = 40 and intervals = 25 μm, for number = 7. An empirical equation relating the curvature to depth and intervals was also provided. The results of the analysis are useful for the design of laser-scribed grooves on various polymer films, for the enhancement of their bending curvature, while minimizing the mechanical instability.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.