Skip to content
naulon
Not checkedNot checked for notices yet.

The bearing parallel misalignment running model–based machine tool spindle thermal error analysis

Yanfang Dong, Zude Zhou, Lihai Chen

Advances in Mechanical Engineering · 2018

doi:10.1177/1687814018778629 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

As a key component of the machine tool spindle, bearing has critical influences on the spindle thermal error. In particular, the installation errors of bearing have considerable effects upon the spindle thermal error by altering the bearings’ internal contact angles, contact loads, and friction torques for different ball positions, but have yet to be fully elucidated. In this article, the influence of installation errors on the resulting spindle thermal error was evaluated using both empirical methods and simulation method, with the ultimate aim of reducing installation error. Deviations within the bearing support were used to simulate bearing parallel misalignment; bearing parallel misalignment running model was built, and an analysis and comparison of various conditions were used to determine the influence, showing that the parallel misalignment has significant influence on the spindle Z direction thermal error.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.