A comparison study on the stiffness and natural frequency of a redundant parallel conveyor and its nonredundant counterpart
Liping Wang, Guang Yu, Jun Wu
Advances in Mechanical Engineering · 2017
doi:10.1177/1687814017733690 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This study performed a comparison of the stiffness and natural frequency of a redundant parallel conveyor and its nonredundant counterpart. A 3-degree-of-freedom parallel conveyor that is used for the pretreatment and electrocoating of car bodies is simplified into a planar redundant parallel manipulator to derive the kinematic and dynamic models using a symmetrical architecture. The stiffness model is derived with a matrix structural method, and the dynamic model is obtained. The position and orientation workspace is analyzed, and the conditioning performances of the redundant manipulator and the nonredundant counterpart are assessed. Next, we contrast the stiffness and natural frequency of the redundant parallel manipulator with its nonredundant counterpart. The simulation results indicate that the redundant parallel manipulator has a greater stiffness and a higher natural frequency in the workspace. The redundant parallel manipulator is a preferred choice for developing this parallel conveyor.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.