Simulation and experimental studies of induction heating during the partial upset-extrusion of a nuclear main pipe
Xinyu Mao, Lei Zhang, Xin Wang and 2 more
Advances in Mechanical Engineering · 2016
doi:10.1177/1687814016680736 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
As a large, abnormal pipe with branches, the main pipe of an AP1000 nuclear power plant is quite difficult to process integrally. To this end, researchers at Tsinghua University have proposed an integral processing method called partial upset-extrusion, which relies on high-quality online local heating. Induction heating is ideal for this purpose; however, it cannot be directly applied in the partial upset-extruding process without a thorough understanding of the heating pattern of a pipe of the desired type with a prefabricated hole. In this study, the induction heating of such a scaled abnormal pipe during the partial upset-extruding process was investigated numerically and experimentally. A coupled thermal–electromagnetic simulation was performed using the finite element method. It was shown that the prefabricated hole led to local overheating, and that this problem could be solved by placing a lid over the hole. These findings were experimentally verified using thermocouples to acquire the temperature curves of a sample pipe during the heating process. The factors influencing the heating process were further analyzed and optimized numerically. It was shown that the method proposed in this study is suitable for applying online local heating during the integral processing of a nuclear main pipe.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.