Not checkedNot checked for notices yet.
Internal defect identification method of TSV 3D packaging based on built-in integrated sensor
Lei Nie, Yifan Huang, Yehan Yin and 3 more
Advances in Mechanical Engineering · 2022
doi:10.1177/16878132221121480 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
TSV (Through Silicon Via) is a key technology for three-dimensional (3D) packaging due to its unique vertical interconnection method. However, its particular manufacturing process of-ten leads to internal defects, such as gaps, bottom voids, filling missing, which are usually difficult to be detected by common means. In order to discover the internal defect of TSV packaging effectively, a novel non-destructive inspection method based on built-in integrated temperature sensor array is proposed. The relationship between temperature distribution and internal defect is dis-covered and then corresponding sensor array layout is designed. The simulation analysis shows that this kind of sensor array can recognize the internal TSV defect. And supervised machine learning is used to construct the classification model by which different defects can be found and classified with relatively high accuracy, and the classification accuracy rate can reach 95.625%. Experiments were conducted and the rationality of this built-in sensing array was verified. The research provides a non-destructive testing method for TSV internal defects based on bulit-in-integrated sensors, and verifies the feasibility of sensor arrangement through simulation, laying a foundation for the realization of later TSV design optimization.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.