Optimization analysis and Field application of gas-liquid cyclone separator based on CFX
Lin Wang, Chong Xie, Zhimin Wang and 1 more
Advances in Mechanical Engineering · 2022
doi:10.1177/16878132221119951 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
At present, large and cumbersome gravity sedimentation separators are generally used in the separation of liquid and gas in the wellbore during emergency blowout or circulating degassing in drilling, and innovation and improvement are urgently needed. In this paper, CFX commercial simulation software is used to analyze the cut-in cyclone separator, and the axial inlet type cyclone separator with different length ratios of cylinder-cone section in swirling flow section under different flow channel structures, and carried out indoor simulation and field test verification. The results show that the axial inlet type cyclone separator is more suitable for gas-liquid separation than the cut-in cyclone separator, and the separation can be well improved by increasing the length-diameter ratio of the cyclone section under the cut-in cyclone separator structure. Finally, the experimental separation efficiency reached 99%, and the field test separation efficiency reached more than 98%. This greatly improves the separation efficiency of liquid and gas during the drilling process, and also plays a certain role in promoting the separation of gas and liquid in the entire oil and gas industry.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.