Skip to content
naulon
Not checkedNot checked for notices yet.

Relationship between Pull-Out Strength and Oscillation Angle in Bipolar Cups: An Study

Nobuhiro Kaku, Tomonori Tabata, Hiroshi Tsumura

Journal of Orthopaedic Surgery · 2016

doi:10.1177/1602400218 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Purpose To compare the past and present bipolar hip arthroplasty (BHA) models in terms of balance between pull-out strength and oscillation angle (OA). Methods The pull-out strength and OA of 8 BHA models were compared: UPF-II, IBC, and Tandem XLPE (Smith & Nephew); Ringloc x (Biomet); J-FX (DePuy); Bipolar (Nakashima Medical); Multipolar (Zimmer); and Centrax (Stryker). Results Respectively for the UPF-II, IBC, Tandem, Ringloc, J-FX, Nakashima Bipolar, Multipolar, and Centrax, the mean pull-out strength was 2219 N, 3303 N, 1503 N, 951 N, 1453 N, 1856 N, 1536 N, and 753 N, whereas the mean OA was 54.2°, 53.8°, 64.0°, 73.2°, 63.0°, 65.4°, 55.6°, and 75.4°. The OA was lower in the integrated types. For pull-out strength of the locking mechanism, the integrated type (IBC and Nakashima) was stronger than the metal or polyethylene ring-lock type (all others). The pull-out strength and OA were negatively correlated ( r = −0.881, p=0.007), and the balance between the 2 varied for different models. Conclusion There is a trade-off between the pull-out strength and OA; optimal balance between the 2 should be based on each patient's need.

Abstract licence: CC BY-NC

References26

  1. 17.

25 more references, whose wording the paper’s licence keeps private.

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.