Ultrasonic measurement on axial force of high-strength bolt in service
Xin-Xin Zhao, Yi-Ming Li, Xiao-Guang Liu and 1 more
Journal of Low Frequency Noise, Vibration and Active Control · 2020
doi:10.1177/1461348418815405 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In order to reduce the effect of delayed fracture of high-strength bolts on train operation and structural safety, a non-destructive testing method for axial force of high-strength bolts in railway steel bridges is studied to identify and replace over-twisted bolts in time, so as to reduce the probability of delayed fracture caused by external factors. Based on the acoustic-elastic effect theory, considering the uneven internal stress distribution of bolts in service, in this paper, the bolt force area is differentiated into three regions: the nut, the screw and the thread; the author calculates the ultrasonic flight-time in different bolt stress areas and revises the impact of bolt elastic deformation and temperature by external force on sound speed and puts forward a more precise measurement method of axial force of bolt in service. According to the results of the test, the relative error between the ultrasonic measurement result and the displayed value of pressure sensor is less than 10%.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.