Skip to content
naulon
Not checkedNot checked for notices yet.

A New Approach to Controlling Thermal Processes

William K. Roots MSc, PhD, WhF, FIEE, Sen Mem IEEE, MIE Aust, Loren D. Meeker BS, BA, SM, MSc, PhD.

Measurement + Control · 1969

doi:10.1177/002029406900201102 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Roots and Wu (1967) established that meaningful models of common thermal processes (boilers without superheaters, furnaces, ovens, vats, kilns etc.) can be made from a cascade comprising an open-loop gain μ, a transit delay L, and a salient time constant T. They used this model to establish facile procedures for stability determination when such processes were closed-loop controlled. A new procedure is now presented that not only facilitates stability studies but also greatly simplifies transient response determination for all commands and disturbances likely to be encountered by such closed loop controlled processes. This new approach is based on a generalised parameter v that incorporates μ, L and T. Then by means of a new plane, the w plane, displays are presented that readily predict the stability criteria and the transient response for any practical combination of command and disturbance; as is shown by the examples contained in the Appendix. This has radically simplified the control amd instrumentation of the processes with which the authors are associated (induction furnaces, fluidised beds, plasma torches, zone refining, etc.) and the presentation is intended for industrial engineers concerned with the design and control of similar thermal processes.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.