Experimental Study of Hydraulic Fracture Propagation Behavior during Multistage Fracturing in a Directional Well

Due to the limited space of offshore platform, it is unable to implement large-scale multistage hydraulic fracturing for the horizontal well in Lufeng offshore oilfield. Thus, multistage hydraulic fracturing technology in directional well was researched essentially to solve this problem. Modeling of fracture propagation during multistage fracturing in the directional and horizontal wells in artificial cores was carried out based on a true triaxial hydraulic fracturing simulation experiment system. The effects of horizontal stress difference, stage spacing, perforation depth, and well deviation angle on multifracture propagation were investigated in detail. Through the comparative analysis of the characteristics of postfrac rock and pressure curves, the following conclusions were obtained: (1) multistage fracturing in horizontal wells is conducive to create multiple transverse fractures. Under relatively high horizontal stress difference coefficient (1.0) and small stage spacing conditions, fractures tend to deflect and merge due to the strong stress interference among multiple stages. As a consequence, the initiation pressure for the subsequent stages increases by more than 8%, whereas in large stage spacing conditions, the interference is relatively lower, resulting in the relatively straight fractures. (2) Deepening perforation holes can reduce the initiation pressure and reduce the stress interference among stages. (3) When the projection trace of directional wellbore on horizontal plane is consistent with the direction of the minimum horizontal principal stress, fractures intersecting the wellbore obliquely are easily formed by multistage fracturing. With the decrease of well deviation angle, the angle between fracture surface and wellbore axis decreases, which is not conducive to the uniform distribution of multiple fractures. (4) When there is a certain angle between the projection trace of directional wellbore on horizontal plane and the direction of minimum horizontal principal stress, the growth of multiple fractures is extremely ununiform and the fracture paths are obviously tortuous.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.