Bearing Capacity Estimation of Bridge Piles Using the Impulse Transient Response Method

A bearing capacity estimation method for bridge piles was developed. In this method, the pulse echo test was used to select the intact piles; the dynamic stiffness was obtained by the impulse transient response test. A total of 680 bridge piles were tested, and their capacities were estimated. Finally, core drilling analysis was used to check the reliability of this method. The results show that, for intact piles, an obvious positive correlation exits between the dynamic stiffness and bearing capacity of the piles. The core drilling analysis proved that the estimation method was reliable.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.