Skip to content
naulon
Not checkedNot checked for notices yet.

Possible use of the hyperelastic material models in numerical analysis of the wood-strand mat compression

Václav Sebera, Jan Tippner

Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis · 2009

doi:10.11118/actaun200957040083 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The main goal of the work was to evaluate a possibility of using various hyperelastic material mo­dels implemented into ANSYS computational system for the numerical analysis of wood-strand mat pressing or wood-based composites. Subsequently, the most suitable hyperelastic model was used as a material model in compression simulation. Pressing itself was modelled as a contact transient ana­ly­sis with wood-strand mat being defined as a homogenous and isotropic continuum with the chosen material model. In the analysis only displacement degrees of freedom are considered. Output of the simulation is a contact pressure, which is necessary to apply to compress the mat on the required height. The analysis serves as a take-off platform for further research in wood-based com­po­si­tes pressing process.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.