Dual-Loop-Controlled Coupled-Inductor Buck Converter in Low-Power Applications
Chih-Shen Yeh, Oscar Yu, Xiaonan Zhao and 1 more
IEEE Open Journal of Power Electronics · 2020
doi:10.1109/ojpel.2020.2964829 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Coupled-inductor buck converters are more effective in high step-down applications compared to conventional buck converters given the same circuit complexity. A coupled-inductor buck converter can adopt synchronous conduction mode to fully mitigate turn-on loss and operate at high frequency. However, this typically induces large circulating currents and harms the converter's light-load efficiency. To alleviate these issues, this paper analyzes the mechanisms behind synchronous conduction mode and then proposes a dual-loop control method solution. The variable-frequency outer loop of the proposed control minimizes conduction and deadtime loss, while the voltage-mode-controlled inner loop provides the necessary output voltage regulation. Experiments are conducted with a compact prototype converter using switching frequencies higher than 2 MHz, and the prototype is verified under load transients to validate both control loops. The results show that the light-load efficiency can be boosted by more than 8%.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.