Skip to content
naulon

Not checkedNot checked for notices yet.

Fabrication of Low Loss Lithium Niobate Rib Waveguides Through Photoresist Reflow

Karan Prabhakar, Ronald M. Reano

IEEE Photonics Journal · 2022

doi:10.1109/jphot.2022.3222184 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

We present lithography and argon plasma etching of lithium niobate on insulator (LNOI) rib waveguides using reflowed photoresist etch masks and 405 nm photolithography. Melting the photoresist at temperatures greatly exceeding its glass transition temperature while minimizing feature distortion through photoresist adhesion control reduces sidewall surface roughness and allows the photoresist to be used both as the pattern mask and the hard etch mask. Waveguide sidewall surfaces exhibiting sub-nm root mean square roughness are fabricated. Dependence of sidewall roughness and angle on feature width, and propagation loss on thermal annealing of the fabricated devices is characterized. Measured quality factors on fabricated microresonators exceed one million. LNOI rib waveguides and resonators with low propagation loss increase nonlinear optical conversion efficiencies and are useful for efficient electro-optic modulation. Photolithography compatible fabrication of low loss LNOI photonic integrated circuits facilitates scalable commercialization.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.