Skip to content
naulon

Not checkedNot checked for notices yet.

Solid-State Pulsed Time-of-Flight 3-D Range Imaging Using CMOS SPAD Focal Plane Array Receiver and Block-Based Illumination Techniques

Juha Kostamovaara, Sahba Jahromi, Lauri Hallman and 3 more

IEEE Photonics Journal · 2022

doi:10.1109/jphot.2022.3153487 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Full realization of a solid-state 3-D range imager based on the pulsed time-of-flight method is presented. The system uses block-based segmented illumination in the transmitter realized with a 16-element common anode laser diode bar. The receiver is based on a single chip 2-D SPAD&#x002F;TDC 0.35 &#x03BC;m CMOS array with 32 &#x00D7; 128 SPAD pixels and 257 TDCs. Segmentation of the illumination improves the SN<sub>BG</sub>R in the detection and results in simpler receiver realization than in the commonly used flood-illumination approach. The system is capable of producing cm-accurate 3-D range images within a FOV of 40&#x00B0; &#x00D7; 10&#x00B0; up to a range of 15 m in normal office lighting at a frame rate of &#x223C;30 fps using a low average illumination power of only 2.6 mW. In background illumination of &#x223C;20 klux, 3-D range images were captured at a distance of &#x223C;13 m using the gated SPAD approach at a frame rate of &#x223C;1 fps.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.