Skip to content
naulon

Not checkedNot checked for notices yet.

Cascoded Active Quencher for SPADs With Bipolar Differential Amplifier in 0.35 μm BiCMOS

Bernhard Goll, Bernhard Steindl, Horst Zimmermann

IEEE Photonics Journal · 2022

doi:10.1109/jphot.2022.3149719 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Fast active quenching of single-photon avalanche diodes (SPADs) is important to reduce the afterpulsing probability (APP). An option to reduce the reaction time of electronics to a SPAD's avalanche is to design a quencher exploiting bipolar transistors. A quencher in a 0.35 μm CMOS technology with a nominal supply voltage of 3.3 V, which operated with excess bias voltages up to 6.6 V, was re-designed accordingly. In the new 0.35 μm pure-silicon BiCMOS quencher, the comparator takes advantage of a bipolar differential amplifier, which additionally gives the head room to increase the width of some CMOS transistors as well. The proposed BiCMOS quencher is able to drive the load of a wire-bonded 184 μm-diameter SPAD, while the CMOS design fails. A comparison, where both chips are measured with a wire-bonded, 34 μm-diameter SPAD, shows that the BiCMOS quencher has a reaction time, which is 330 ps to 1.1 ns faster than that of the CMOS quencher.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.