Not checkedNot checked for notices yet.
High Efficiency 1.9 Kw Single Diode Laser Bar Epitaxially Stacked With a Tunnel Junction
Yuliang Zhao, Zhenfu Wang, Abdullah Demir and 6 more
IEEE Photonics Journal · 2021
doi:10.1109/jphot.2021.3073732 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
We report on the development of a 940-nm diode laser bar based on epitaxially stacked active regions by employing a tunnel junction structure. The tunnel junction and the device parameters were systematically optimized to achieve high output and power conversion efficiency. A record quasi-continuous wave (QCW) peak power of 1.91 kW at 25 °C was demonstrated from a 1-cm wide bar with a 2-mm cavity length at 1 kA drive current (200 μs pulse width and 10 Hz repetition rate). Below the onset of the thermal rollover, the slope efficiency was as high as 2.23 W/A. The maximum power conversion efficiency of 61.1% at 25 °C was measured at 300 A. Reducing the heatsink temperature to 15 °C led to a marginal increase in the peak power to 1.95 kW.
Abstract licence: CC BY-NC-ND
References28
28 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.