Skip to content
naulon

Not checkedNot checked for notices yet.

Rough Side-Polished Fiber With Surface Scratches for Sensing Applications

Jing Zhao, Guolu Yin, Changrui Liao and 6 more

IEEE Photonics Journal · 2015

doi:10.1109/jphot.2015.2423288 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

We demonstrated a fast mechanical wheel lapping technique to fabricate a convenient and low-cost side-polished fiber (SPF) with a rough, rather than smooth, polished surface. Such a bare SPF can be directly used to develop a promising sensing device, because a Mach-Zehnder interference pattern with high fringe contrast above 10 dB in transmission spectrum was achieved due to the macro scratches on the rough polished surface. Fabrication parameters, e.g., thickness of remaining fiber, polished length, and roughness of abrasive paper, were optimized. The sensor exhibited strain and temperature sensitivities up to -2.00 pm/με and 29.37 pm/°C and can be used to realize simultaneous strain and temperature measurement.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.