Skip to content
naulon
Not checkedNot checked for notices yet.

Hybrid Soldering 2.3D Assembly With High Reliability and Low Cost

Han-Wen Hu, Yu-Wei Huang, Yi-Chieh Tsai and 2 more

IEEE Journal of the Electron Devices Society · 2022

doi:10.1109/jeds.2022.3205951 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In this study, an advanced 2.3D solution was proposed to integrate RDL interposer and FR-4 substrate using the technique of hybrid soldering, which applies printing of epoxy solder paste to form the hybrid joint. The simulation was performed to evaluate warpage and von Mises stress of different joint structures, indicating that the hybrid joint structure is promising for the reliability of 2.3D assembly. In addition, hybrid soldering 2.3D assembly was successfully demonstrated, followed by SEM analyses, electrical measurements, warpage measurements, and thermal cycling tests for 5000 cycles. The experimental results validate that the packaging can achieve high reliability without the needs of underfill. Thus, this solution paves the way for large area 2.3D integration with low cost, high throughput, and high reliability.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.