Skip to content
naulon

Not checkedNot checked for notices yet.

Development of Ni₂P Contact Technology and Its Integration on III-V Materials for 300 mm Si Photonics Platform

Flore Boyer, Romain Famulok, Stephane Minoret and 4 more

IEEE Journal of the Electron Devices Society · 2022

doi:10.1109/jeds.2021.3135971 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In order to assess their potential use as contact layers for Si photonics devices, Ni<sub>2</sub>P thin films were developed on a 300 mm platform. The Ni<sub>2</sub>P layers, obtained by magnetron sputtering of a Ni<sub>2</sub>P target, were stable and reproducible. The films were mainly composed of the hexagonal Ni<sub>2</sub>P phase with small amount of Ni<sub>12</sub>P<sub>5</sub> impurities. The film density was 6.9 g/cm<sup>3</sup> with a ratio of 62 at.&#x0025; of Ni and 38 at.&#x0025; of P. We implemented and integrated these Ni<sub>2</sub>P films on III-V structures to study their electrical properties on n-InP and p-InGaAs (i.e., n-doped and p-doped III-V/Si hybrid laser contact layers). The results obtained on p-InGaAs did not meet the requirements in terms of contact resistivity. On the other hand, due to its high thermal stability and low contact resistivities, Ni<sub>2</sub>P metallization exhibited the best results among the Ni-based metallizations studied for contacting n-InP layers, namely Ni, NiPt and Ni<sub>2</sub>P.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.