Skip to content
naulon
Not checkedNot checked for notices yet.

Phase Change Memory Cell With Reconfigured Electrode for Lower RESET Voltage

Shaolin Zhou, Kezhou Li, Yihan Chen and 3 more

IEEE Journal of the Electron Devices Society · 2019

doi:10.1109/jeds.2019.2948254 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

To reduce the reset voltage and thus leakage current of the cross-point architecture of phase change memory (PCM), a type of 1S1R cell hierarchy with reconfigured electrode capping around the phase change material is explored in this paper. The electro-thermal behavior during the RESET phase transition is mimicked using a finite element model. Results indicate that the temperature distribution, potential drop and current density across the active region can be reshaped. Especially, the process of temperature evolution for phase transition is accelerated and thus the PCM cell can be reset under a lower voltage, e.g., from 2.2 V to 1.2 V for our typical configuration with a GST width of 40 nm and heater width of 20 nm. As a result, the lower RESET voltage decreases the leakage current and power consumption, potentially leading to an increased integration level for cross-point PCM.

Abstract licence: CC BY-NC-ND

References29

    29 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.