Test System for Thin Film Transistor Parameter Extraction in Active Matrix Backplanes
Sanil Daniel, Aswathi Nair, Sanjiv Sambandan
IEEE Journal of the Electron Devices Society · 2019
doi:10.1109/jeds.2019.2922000 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Thin film transistor (TFT) active matrix backplanes are used in large area electronic systems, such as displays and image sensors. With backplanes being fabricated on wearable and flexible substrates, the possibilities of operational faults in backplanes have increased. These faults could either be hard faults, such as line opens or shorts or could be softer faults, such as time dependent variations in the TFT transfer characteristics. Real time diagnosis of these faults require built-in-self-test systems. While many such systems have been demonstrated to diagnose hard faults, an easily realizable system to identify soft faults, such as variations in transistor transconductance remain an open challenge. In this paper, we discuss a system that extracts the transconductance by charging and then discharging the pixel capacitor at various gate voltages for an active matrix liquid crystal display backplane. This permits a plot of the time averaged current versus the gate voltage from which the spatial variation of transconductance can be extracted. The details of the design are discussed and a proof of concept with a 3×4 amorphous silicon backplane is demonstrated.
Abstract licence: CC BY-NC-ND
References18
18 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.