Skip to content
naulon
Not checkedNot checked for notices yet.

Optically Powered Energy Source in a Standard CMOS Process for Integration in Smart Dust Applications

Jing Jing Liu, Grahame Faulkner, Bhaskar Choubey and 4 more

IEEE Journal of the Electron Devices Society · 2014

doi:10.1109/jeds.2014.2341602 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In order to miniaturize nano-power sensor nodes or smart dust, an optically powered energy source is developed to replace traditional batteries or solar cells. This energy source consists of two photodiodes, which are P-well/DN-well and N-well/P-sub. The two photodiodes with an area of 1.5mm2 were fabricated using the UMC 0.25μm CMOS process and tested using an 830nm laser. Measurement results show that the energy source is able to generate a voltage from 0.5V to 0.8V with a 3.5% conversion efficiency. The proposed energy source was made using a standard CMOS process and therefore can to be integrated with the smart dust circuit on a single chip.

Abstract licence: CC BY-NC-ND

References19

    19 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.