Effect of Wafer Tilt During Ion Implantation on the Performance of a Silicon Traveling-Wave Mach-Zehnder Modulator

This paper reports a study of the effect of wafer tilt during dopant implantation on the performance of silicon PN phase shifter and traveling-wave Mach-Zehnder modulator. The PN phase shifter is designed and process simulated to include the effects of different fabrication processes in the device performance. The wafer tilt during implantation is varied from 0&#x00B0; to 3&#x00B0;, 5&#x00B0;, and 7&#x00B0;. The resulting crystal damage during dopant implantation to form the PN junction and the active concentration profile upon annealing, along with the formation of dopant&#x2013;defect clusters, are discussed. Compared to 0&#x00B0; tilt, 7&#x00B0; tilt results in <inline-formula> <tex-math notation="LaTeX">$1.58\times $ </tex-math></inline-formula> higher phase shift and better modulation efficiency. The overall phase shifter performance is improved using 5&#x00B0; wafer tilt for implantation resulting in <inline-formula> <tex-math notation="LaTeX">$1.23\times $ </tex-math></inline-formula> lower absorption, <inline-formula> <tex-math notation="LaTeX">$1.45\times $ </tex-math></inline-formula> better modulation efficiency, and <inline-formula> <tex-math notation="LaTeX">$3.14\times $ </tex-math></inline-formula> higher 3 dB <inline-formula> <tex-math notation="LaTeX">$RC$ </tex-math></inline-formula> modulation bandwidth for lumped-driven phase shifter. A traveling-wave electrode to enhance the modulation bandwidth is used, and the modulator performance for non-return-to-zero on-off-keying modulation with&#x2013;2.5 V bias and 2.5 <inline-formula> <tex-math notation="LaTeX">$\text{V}_{pp}$ </tex-math></inline-formula> drive signal across each arm is evaluated using a dual-arm push-pull drive. The sample with 5&#x00B0; tilt shows better traveling-wave and modulator high-speed characteristics compared to the other samples. Among the four samples with different wafer tilts, the sample with 0&#x00B0; tilt shows the worst phase shifter performance, and the sample with 3&#x00B0; tilt shows the worst modulator characteristics. The best overall performance is obtained for the sample with 5&#x00B0; tilt. Compared to the modulator with implantation at 0&#x00B0; tilt, the 5&#x00B0; tilted sample shows <inline-formula> <tex-math notation="LaTeX">$2.3\times $ </tex-math></inline-formula> higher 6.4 dB electrical bandwidth and <inline-formula> <tex-math notation="LaTeX">$1.36\times $ </tex-math></inline-formula> higher 3 dB electro-optic bandwidth at&#x2013;2.5 V using a traveling-wave electrode with <inline-formula> <tex-math notation="LaTeX">$1.48\times $ </tex-math></inline-formula> lower energy-per-bit for 5 km transmission at the KP4-forward-error-correction bit-error-rate threshold. The comparison of the effect of wafer tilt angles on various device metrics is presented and discussed.

Abstract licence: CC BY-NC-ND

32 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.