Single Stage Low Noise Inductor-Less TIA for RF Over Fiber Communication
Vijay Kumar, G. Sai Saravanan, Punithavathi Duraiswamy and 1 more
IEEE Access · 2021
doi:10.1109/access.2021.3119962 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This paper presents design, mathematical analysis, and measurement of low noise single-stage transimpedance amplifier (TIA) with scalable bandwidth using 130 nm bipolar complementary metal-oxide-semiconductor (BiCMOS) silicon-germanium (SiGe) process. Common-emitter (CE) shunt-shunt feedback topology with active inductor peaking has been used in the design for improving noise, gain and driving capability of TIA by decreasing the input and output impedance, respectively. The use of active inductive peaking in CE shunt-shunt feedback topology has resulted in a new TIA configuration with better performance. The circuit has been optimized for low noise by adopting the proposed design technique. Validity of the mathematical analysis and design for the proposed TIA has been established with the help of simulations as well as measurement results. The measurement results of Ku-band TIA (10 MHz to 14 GHz) have demonstrated a transimpedance gain of <inline-formula> <tex-math notation="LaTeX">$53.2~dB\Omega $ </tex-math></inline-formula>, input-referred current noise of 16.8 pA/ <inline-formula> <tex-math notation="LaTeX">$\sqrt {Hz}$ </tex-math></inline-formula> with power consumption of <inline-formula> <tex-math notation="LaTeX">$9.8~~mW $ </tex-math></inline-formula>. The design architecture is adaptable for higher frequency bands, which has been demonstrated by designing another TIA covering K- and Ka-bands (10 MHz to 35 GHz) with transimpedance gain of 33.4 dB <inline-formula> <tex-math notation="LaTeX">$\Omega $ </tex-math></inline-formula>, input-referred current noise of 29.4 pA/ <inline-formula> <tex-math notation="LaTeX">$\sqrt {Hz}$ </tex-math></inline-formula> with power consumption of <inline-formula> <tex-math notation="LaTeX">$28.1~~mW $ </tex-math></inline-formula> in the post-layout simulation results, and occupies same chip area as that of 14 GHz, i.e., <inline-formula> <tex-math notation="LaTeX">$0.1\times 0.21\,\,mm^{2}$ </tex-math></inline-formula>
Abstract licence: CC BY-NC-ND
References34
34 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.