Experimental Assessment of High Frequency Bearing Currents in an Induction Motor Driven by a SiC Inverter

Compared with silicon (Si) IGBTs, silicon carbide (SiC) MOSFETs have much faster switching speeds and high switching frequency operation capability, enabling compact and high-efficiency motor drive systems. However, the increased switching speed and frequency also cause increased-level of common-mode (CM) voltage with higher slew rates (<italic>dv</italic>/<italic>dt</italic>). The CM voltage leads to machine leakage currents as well as bearing currents such as electric discharge machining (EDM) type current and capacitive-type (<italic>dv</italic>/<italic>dt</italic>) current. These bearing currents can cause degradation or failure of motor bearings. In order to investigate the impact of SiC motor drives on the motor bearing currents, in this paper, the mechanism and modelling of bearing currents are analyzed first. Then, a direct measurement method is used to assess the bearing currents in the induction motor driven by the SiC converter. In the experiment, the number of EDM current events is counted and the amplitude of the capacitive-type of current is also examined under various switching speeds and frequencies of SiC devices. Furthermore, the bearing currents are also extensively tested under various bearing temperatures, motor speeds and dc-link voltages. The correlations between the bearing currents and various factors have been revealed in this paper.

Abstract licence: CC BY-NC-ND

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.