Measurement-Based Massive MIMO Polarimetric Channel Characterization in Outdoor Environment

This paper introduces a measurement campaign to investigate the characteristics of massive multiple-input multiple-output (MIMO) channels in both line-of-sight (LoS) and obstructed LoS suburban outdoor environments. The measurements are conducted at the center frequency of 3.5 GHz with a bandwidth of 160 MHz. The transmitter is equipped with a 4 × 8 planar patch antenna array and the receiver is equipped with a 4 × 8 cylindrical patch antenna array. Each patch consists of two antenna ports which have main polarizations of +45° and -45°, respectively, resulting in a total of 64 × 64 sub-channels. We examined the influence of different polarization combinations on channel characteristics such as power delay profile (PDP), K-factor and delay spread for both LoS and obstructed LoS scenarios. Results show that the characteristics are more dependent on the Rx antennas rather than the Tx antennas. When the Rx antennas are facing the Tx antenna array, the received power is higher, the K-factor is lower and the delay spread is lower in cross-polarization cases with respect to the co-polarization ones in general. When the Rx antennas are back-facing the Tx antenna array, lower powers, higher K-factors and higher delay spreads can be observed in cross-polarization cases with respect to the co-polarization cases. In conclusion, the polarimetric influence on the channel characteristics depends on the antenna structure as well as the environment.

Abstract licence: CC BY-NC-ND

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.